Articles, Conference and Workshop Papers Collection

Permanent URI for this collectionhttp://10.10.97.169:4000/handle/123456789/68

Browse

Now showing 1 - 20 of 37

Inventory of dalbergia melanoxylon (mpingo) in the Southern part of Tanzania: the case of Nachingwea
(2002-03) Opulukwa, Meshack J.; Hamza, K. F. S; Malende, Y. H. M. B.
The study was designed to assess the current status of Dalbergia melanoxylon (Mpingo) in Tanzania. A total of 44 sample plots (3.08 ha) were laid on public land. D. melanoxylon contributes about 4% of all total stems out of 103 tree species identified and most of them found in clusters. Out of all visited plots 36.4% had D. melanoxylon. Parameters determined include height, stems per hectare, basal area per hectare, volume per hectare and diameter class of trees. The number of stems, basal area and volume per hectare was found to be 20, 1.2m2 and 8.6m3 respectively. The stems were distributed in five diameter classes. Based on the importance of D. melanoxylon for the economy of Tanzania, it is recom- mended that national inventory for the species should be carried out in order to know the existing stock and to prescribe sustainable harvesting regimes. Licensing for logging D. melanoxylon should be based on estimates of the yield and not on the existing demand.
Comparison of dimensional stability of particle boards Manufactured in Tanzania and those imported from South Africa
(2004) Gillah, P.R; Ishengoma, R.C; Deogratias, J; Kitojo, D.H
Dimensional stability properties of particleboard from Tembo Chipboard Ltd, located in Tanga, Tanzania and of those imported from South Africa were determined and compared. A total of 64 test samples, 32 from Tembo Chipboard Ltd and 32 from South Africa chipboard cut randomly from boards were used for the study. Prior to the determination of the dimensional stability, moisture content and basic density of boards were determined in accordance to EN 322 and EN 323 standards respectively. Determination of dimensional stability was based on water soak test, according to EN 317 standard. From the results, the basic densities of particleboard from Tembo Chipboard Ltd and those from South Africa were very similar at 687 and 671 kg/m3 respectively. Similarities in basic densities allowed for comparison of other properties. Thickness swelling and water absorption values of chipboards from Tembo Chipboard Ltd and S. Africa increased with increase in water immersion period. Comparatively, boards from Tembo Chipboard Ltd had lower thickness swelling and water absorption than boards from South Africa. Furthermore, less board damage due to water immersion was demonstrated by boards from Tembo Chipboard Ltd than those from S. Africa due to their low irreversible thickness swelling. The particleboards from Tembo Chipboard Ltd are more dimensionally stable than similar boards from S. Africa.
Determination of basic density and strength properties of Cordia Africana Lam. Grown in agroforestry system in Lushoto, Tanga
(Tanzania Journal of Forestry and Nature Conservation, 2004) Hamza, K. F.S.; Makonda, F. B. S.; Mwamakimbullah, R.; Said, A. S.
Basic density and strength properties of Cordia africana Lam. grown in agroforestry systems in Lushoto, Tanga were determined. Six sample trees were randomly selected in the same farm at Shashui village near Soni. After measuring dbh the trees were felled and total tree height recorded. Four discs were cut at breast height, 30%, 60% and 90% of the total tree height for basic density determination. A one metre long log was cut above 1.3m for strength properties determination. A central plank measuring 6cm including pith was sawn in east-west direction from each log. Standard methods were used in determination of basic density and strength properties. The main findings of this study were as follows: Basic density was 0.40g/cm3; Basic density increased moderately from the pith to a certain point after which it remained more or less constant; Basic density decreased from the butt to the top of the tree. Mean values for modulus of rupture, modulus of elasticity, maximum crushing stress and shear parallel to grain, compression stress and cleavage perpendicular to grain were lower than those for common hardwoods such as Ocotea usambarensis and Albizia spp. found in Lushoto. There was positive correlation between basic density and strength properties. It was recommended that, wood from C. africana grown in Lushoto and other areas with similar soil and climatic conditions could be used for light construction work and furniture making. It was further recommended that, more studies should be done in other geographical conditions where the species is grown so as to make concrete conclusions on efficient utilization of the species.
The potential of afromontane rain forests to mitigate carbon emissions in Tanzania
(2004-07-10) Maliondo, S. M.; Msanya, B. M.; Munishi, P. K. T.; Temu, R. P. C.
One of the major ways of mitigating carbon emissions is by emission avoidance or conserving existing carbon (C) pools on the land through slowing deforestation or improved forest harvesting practices. Field measures of tree dimensions and chemical soil analysis for organic carbon were used to quantify the carbon (C) storage potential of three tropical montane rain forest ecosystems; one on the slopes of Mount Kilimanjaro and two (Usambara and Uluguru) in the Eastern Arc Mountains of Tanzania. The above ground and root carbon of trees ranged from 295±8 to 5/7 ± /7 o:'. The tree carbon storage was lowest in the Kilimanjaro forest (295±8 (SD) t h"), and highest in the Usambara forest (5/7 ± /7 (SD) t s'. The C storage in the Ulugurus was 388± /0 (SD) t «'. The soil carbon storage (/423.7 t h") in Kilimanjaro was significantly higher than that in tree biomass. On the other hand the soil carbon (4/8 ± /00 and 295 ± 53 t h") in the Usambara and Uluguru respectively) was significantly lower than the biomass carbon in both forests in the Eastern A rc forests. The potential of these ecosystems to act as carbon sink and mitigate greenhouse gas emissions is evident. This capacity for carbon storage. population pressure and the extensiveness of these forests in the region makes their conservation of global significance for carbon emission mitigation.
Balancing wood and non-wood products in Miombo Woodlands
(2007) Makonda, F. B. S.; Gillah, P. R.
In most of the sub-Saharan countries including Tanzania, Mozambique, Malawi, Zimbabwe and Zambia, more than 80% of rural people are poor and traditionally rely on existing non-wood goods and services provided by miombo. These woodlands are among the most threatened of the tropical ecosystems. There is a need of investigating the importance of miombo ecosystem, their threats and the governments concerned to ensure sustainable and equitable use of these dwindling resources. This paper gives an overview of the roles played by miombo in the provision of both wood and non-wood products and how the utilization can be balanced for sustainability. It is evident that there has been limited research on miombo productivity and the impact of management on non-timber product supplies. This needs immediate attention in order to address the demand-supply situation. Also sustainable use of trees and shrubs is an integral part of balancing variable products and uses in miombo woodlands. Conservation of miombo while raising the living standard can be enhanced through controlled harvesting, improved domestication and utilization and commercialization of trees and their products.
Some physical and mechanical properties of Uapaca Kirkiana, a lesser-known timber species from Tanzania
(Tanzania Journal of Forestry and Nature Conservation, 2007) Gillah, P. R.; Makonda, F. B.; Ishengoma, R. C.; Kadala, B.; Kitojo, D. H.
This study was carried out to determine some physical and mechanical properties of Uapaca kirkiana a lesser known timber species growing in public land near Iyondo Catchment Forest Reserve, Kilombero District, Morogoro, Tanzania. A total of 3 trees were used in the study. Preparation of test samples and laboratory procedure to determine some physical and mechanical properties followed standard methods. Analysis of variance was used to determine the variation between and within trees and regression analysis was used to determine relationship between wood basic density and mechanical properties. The results showed that Uapaca kirkiana has whitish sapwood and dark brown heartwood, with a mean basic density of 518.14 kg/m3. The properties of Uapaca kirkiana were as follows: modulus of elasticity (7185.69 N/mm2), modulus of rupture (59.7 N/mm2), work to maximum load (0.06 mmN/mm3), total work to failure (0.07 mmN/mm3), shear strength parallel to the grain (11.86 N/mm2), compression strength parallel to the grain (34.4 N/mm2) and cleavage strength (20.21 N/mm width). On axial direction, the modulus of elasticity, total work to failure, compression strength parallel to grain and cleavage strength were directly proportional to its basic density while modulus of rupture, work to maximum load and shear strength parallel to the grain were inversely proportional implying that Uapaca kirkiana is suitable for activities, which require high modulus of elasticity, total work to failure, compression strength parallel to the grain and cleavage strength. On radial direction modulus of elasticity, modulus of rupture, work to maximum load, compression parallel to the grain and cleavage strength were directly proportional to basic density while shear parallel to the grain was inversely proportional to basic density. Compared to Khaya anthotheca, the timber species found in the same location and market; it was found that the timber of Uapaca kirkiana had modulus of rupture and compression parallel to the grain far lower than those of Khaya anthotheca, while the work to maximum load, total work to failure, shear strength parallel to grain and modulus of elasticity were almost the same. Due to the similarity in some of their physical and mechanical properties, the wood of Uapaca kirkiana may berecommended to substitute Khaya anthotheca in wood works that require medium density wood like in decoration where colour is considered an important aspect for appearance and in cabinet, panel and furniture making though it is not adequate in high-class strength joinery.
Tanzania’s forest policy and its practical achievements with respect to community based forest management
(2007-02) Hamza, K. F. S.
Physical and strength properties of azadirachta indica, (a. Juss) Growing in Morogoro, Tanzania
(2008) Gillah, P.R; Augustino, S; Ishengoma, R.C; Nkomulwa, H.O
Physical and strength properties of Azadirachta indica growing in Morogoro, Tanzania were determined and the results compared with already known properties of timber of the same family. The properties determined included basic density, bending strength, stiffness, work to maximum load, total work, compression and shear parallel to the grain and cleavage strength. A total of 160 test samples were used from three trees randomly selected from the study area. Preparations of test samples, actual testing and determination of different properties were carried out following standard methods. All strength property values were adjusted to 12% moisture content. Results showed A. indica to have a mean basic density of 646 kg m- 3, classified as high density timber, comparable to that of Khaya anthotheca and Trichilia emetica from the same family. The overall strength properties of A. indica are lower compared to those of K. anthotheca and T. emetica, however, superior in terms of cleavage strength. Based on the studied properties, the species can successfully substitute K. anthotheca and T. emetica in uses which require high bending, cleavage and shear parallel to the grain strengths. A. indica wood is therefore recommended for uses other than fuel wood and poles such as making furniture, tool handles, artificial limbs, joinery and plywood.
Timber properties of lesser known polyscias fulva (hiern) harms and allophylus abyssinicus hochst. radlk. from Iringa Tanzania
(Tanzania Journal of Forestry and Nature Conservation, 2008) Makonda, F. B. S.; Gillah, P. R.; Augustino, S.; Valentine, S.
Two lesser-known and lesser utilized timber species namely Polyscias fulva and Allophyllus abyssinicus from Iringa, Tanzania were studied to determine basic density and some strength properties. Three trees for each species were randomly selected, felled, test sampled prepared and properties tested according to standard methods. Data analysis was conducted employing Microsoft excel computer software where descriptive statistics were computed. Analysis of variation was done to establish relationships existing between density and strength properties. Variation in basic density between trees and t-test was carried out to compare wood properties of the two species. In addition, regression analysis was used to establish the existing relationship. Tests of strength properties on clear specimens showed that on average, the overall strength properties for Polyscias fulva and Allophyllus abyssinicus were comparable respectively to Pinus caribaea and Terminalia superba, the commercially utilized timber species in Tanzania. Further, with exception of compression parallel to grain, the two species were significantly different. There was statistically significant difference within species in basic density and strength properties with exception of modulus of rupture and cleavage strength for Polyscias fulva and work to maximum load, compression parallel to the grain and cleavage for Allophylus abyssinicus. Furthermore, there were direct relationships between basic density and strength properties for the two timber species. While Pinus patula can substitute Polyscias fulva, Terminalia superba can substitute Allophyllus abyssinicus in most of its applications. The two timber species can be used for light construction work, sporting goods and furniture making. Further work on the studied species is required on other strength as well as chemical properties and natural durability.
Basic density and strength properties of Pines in Uganda
(African Journals Online (AJOL), 2008-02-21) Ishengoma, R. C.; Odokonyero, G.; Makonda, F. B.; Hamza, K. F.
Basic density and strength properties and their variations in 25 year - old Pinus caribaea, P. oocarpa and P. kesiya grown in Katugo, Uganda were investigated. Six trees for each species were selected representing three diameter classes. The trees were felled after measuring their diameter at breast height. Three disks were cut from each tree at 1.3 m, 45% and 75% of total tree height for growth ring width and basic density assessment. For strength properties determination, a central plank measuring 65 mm thick was extracted from each sample tree starting at breast height upwards. Basic density was determined using water displacement. Tests of various strength properties were done in accordance with standard procedures. The data were analyzed using the Statistical Analysis System. Results for the studied properties of Pinus caribaea, P. kesiya and P. oocarpa respectively were as follows: Basic density: 424, 431,and 444 kg/m3; Modulus of rupture: 54.51, 56.31 and 60.69 N/mm2; Modulus of elasticity: 8590,8752 and 8825 N/mm2; Work to maximum load: 0.088. 0.099 and 0.101 mmN/mm3; Maximum compression strength: 33.38, 33.83and 34.66 N/mm2; Maximum shear strength: 9.43, 9.80 and 10.37 N/mm2 and cleavage: 11.79,12.15 and 12.48 n/mm. There were no significant differences in all wood properties between the three species. Between tree variations in wood properties were statistically insignificant (p<0.05) in all the species, indicating a low potential of improving wood quality through selection. Growth rate had no significant influence on wood properties. Wood properties studied decreased significantly from stump upwards the stem and increased from pith outwards in the three species. Strength properties of the three pine species were strongly correlated to basic density with regression coefficients (R2) of above 0.88. Wood strength property values obtained in this study were within the range of pines grown in Kenya and Tanzania. These findings indicate that there are possibilities of expanding the use of these species through promotion. Butt end logs and inner wood can be used for non-structural applications and the outer wood for structural purposes.
Some physical and strength properties of lesser known aphloia theiformis timber from Lushoto Tanga, Tanzania
(Tanzania Journal of Forestry and Nature Conservation, 2008-07-14) Gillah, P. R.; Makonda, F. B. S.; Hussein, I.; Augustino, S.; Kitojo, D. H.
Some physical and strength properties of lesser known Aphloia theiformis timber grown in and around Magamba Forest Reserve, Lushoto district, Tanga region were determined. A total of three sample trees were randomly selected and felled for this study. Test samples for moisture content, basic density and Strength properties determination were prepared and tested according to Lavers (1969), BS 373 (1957), ISO 3130 (1975), ISO 3131 (1975), ISO 3133 (1975) and ISO 3349 (1975). It was observed that Aphloia theiformis timber has a sapwood and heartwood colour ranging from creamcoloured to whitish pink resembling that of Grevillea robusta. The average basic density was 519 kg/m3 with a standard deviation of 4.2 which can be classified as medium-density timber. The basic density showed a slight decrease from butt end to top end. Regarding strength properties, Aphloia theiformis timber had a mean modulus of rupture of about 55.8 N/mm2 and modulus of elasticity of about 3854 N/mm2. The work to the maximum load was about 0.06mmN mm-3, while total work averaged 0.08mmN mm-3. The compression and shear parallel to the grain were 37.4 and 12.6N mm-2 respectively. Furthermore, all strength properties of Aphloia theiformis were positively correlated with basic density. The properties of this timber were also comparable to properties of Grevilea robusta and are always rated the same by timber dealers. While Aphloia theiformis had higher tearing strength than Grevillea robusta, the modulus of rupture and compression parallel to the grain values were comparable. Aphloia theiformis can therefore substitute Grevilea robusta in many areas of its application.
Properties of manilkara discolor (sond.) Hemsl.): A lesser–known Timber species from kilindi district Tanzania
(2009) Gillah, P.R; Makonda, F.B.S; Kitojo, D.H; Ishengoma, R.C; Ussiri, N.E
This work was conducted to determine some physical and mechanical properties of Manilkara discolor, a lesser-known and lesser-utilized timber species from Kilindi District Tanzania. Three large trees free from visible defects were selected, felled and small sample pieces of 20 mm x 20 mm x 60 mm for compression, 20 mm x 20 mm x 20 mm for shear, 20 mm x 20 mm x 45 mm for cleavage and 20 mm x 20 mm x 300 mm for static bending, comprising 72 pieces for each test were prepared. The sample pieces were tested in laboratory using standard methods. The wood was brownish and attractive, fine textured with appealing figure and attaining good finish when plained. The results showed the species to have wood basic Density of 765 kg m -3 , Modulus of Elasticity of 14,341 N mm -2 , Modulus of Rupture of 119.48 Nmm -2 , Work to Maximum Load of 0.132 mm Nmm -2 and Work to Total Fracture of 0.284 mm Nmm -2 . The Compression parallel to grain was 41.69 Nmm -2 , Shear parallel to grain was 18.65 Nmm -2 and Cleavage Strength was 34.97 Nmm -2 . Manilkara discolor wood was found to have desirable values and can be used to substitute other species which are currently in danger of over-exploitation.
Properties of nesogordonia holtzh subsp hotzii (Moss) capuron: a lesser known timber species from Kilindi District, Tanzania
(Tanzania Journal of Forestry and Nature Conservation, 2009) Gillah, P. R.; Makonda, F. B. S.; Kitojo, D. H.; Ishengoma, R. C.
Nesogordonia holtzii subsp holtzii (Moss) Capuron is a lesser-known timber species belonging to the family Sterculiaceae. The species is distributed in the eastern tropical Africa in association with other tree species as Newtonia buchananii, Albizia versicolor, Allanblackia stuhlmanii, Antiaris toxicaria and Sterculia appendiculata. Currently it is harvested for fuelwood and building poles thus being under-valued, Due to its wood technical properties not known to users it is placed in royalty fee class V timbers. The objective of this study was therefore to determine and assess some basic physical and mechanical properties of N. holtzii. Compare the determined strength properties of N. holtzii with those from well known tree species. Use different combinations of the properties of N. holtzii obtained to assign suitable end uses and promote it for its utilization. Three mature sample trees free from visible defects were selected randomly. Each tree was sampled to produced three logs. Test specimens were extracted from the sample logs using the method by Larvers (1969). Physical and strength properties determination was carried out according to the procedure described in ISO 3131(1975) ISO3133 (1975) BS 373(1957, 1976) Larvers (1969) and Panshin and de Zeeuw (1970). The results showed that N. holtzii was found to have yellow timber that turns reddish brown on seasoning and the wood is fine textured. The average basic density is 593 kg m-3 Modulus of Elasticity 7,606 N/mm-3, Modulus of Rupture 81 N/mm-2, Work to Maximum Load 0.098 N mm-3, Total Work 0.196 N mm-3, Compression Stress 48.83 N mm- 2, Shear Stress 11.40 N mm-2 and Cleavage Strength 24.98 N mm-1. These properties are within the acceptable range for the building and furniture industry. As many traditional timbers become scarcer, the timber of Nesogordonia holtzii should be promoted and is recommended as a substitute for Afzelia quanzensis, Pterocarpus angolensis and Newtonia buchananii. The resemblance in colour allows these timber species to be sold in one group.
Properties of celtiz zenkeri engel: a lesser-known timber species from Kilindi District, Tanzania
(Tanzania Journal of Forestry and Nature Conservation, 2009) Gillah, P. R.; Makonda, F. B. S; Kitojo, D. H.; Ishengoma, R. C.; Khalid, S.
This study was conducted to provide some of the basic physical and strength properties of wood of Celtis zenkeri Engel. which is among the lesser-known and lesser-utilized timber species from Tanzania. Celtis zenkeri belonging to the family Ulmaceae is currently being harvested for wood fuel and building poles thus being under-valued and placed in class V timbers since the basic properties of its wood are not yet known. The objective of this study was therefore, to determine and assess some of the basic physical and mechanical properties of C. zenkeri specifically colour, texture, basic density, Static bending (Modulus of Flasticity, Modulus of Rupture, Work to maximum Load and Total work), Compression parallel to grain, Shear and Cleavage stress. Relationships between basic density and the mechanical properties were also assessed. Data for this study were collected from three mature and defect free sample trees objectively selected from Kilindi district in Tanga region. Each sample tree produced three logs; from bottom, middle and upper part of the bole. Test specimens were extracted from the samples and by using standard methods, the physical and mechanical properties were determined. The following are the wood strength properties obtained for C. zenkeri. Basic density (655 kg m-3) and Total Work (21,916 N mm-2), Modules of rapture (198 N mm-2), Work to maximum load (0.360 N mm-3) and Total Work (0.598 N mm-2). Others are; Cleavage strength (24.56 N mm-width), compression strength (97.1 N mm-2) and Shear strength (28.7 N mm-1) Celtis zenkeri wood was found to have desirable values to be used for hand tools, joinery, building, plywood, artificial limbs and flooring furniture.
Medicinal resources of the Miombo woodlands of Urumwa, Tanzania: Plants and its uses
(Journal of Medicinal Plants Research, 2011) Augustino, S.; Hall, J. B.; Makonda, F. B. S.; Ishengoma, R. C.
A study was done to document different plants and their use for primary health care by communities around the Miombo woodland of Urumwa, Tanzania. Data collection was based on semi-structured interviews and discussion with key stakeholders. G-tests were carried out to seek differences in ethnobotanical knowledge between women and men. 110 plant species were documented to have 74 medicinal uses. Men were found to be ethnobotanically knowledgeable than women. The ethnobotanical knowledge of medicinal plant resources at Urumwa need to be recognized and preserved to ensure future effectiveness of the primary health care system. Due to the global interest in medicinal plants, there is a need to carry out phytochemical and pharmacological studies for most unstudied but potential documented species to validate usage, find new pharmaceuticals, increase confidence among users and contribute to the developlent of the traditional medicine sector in Tanzania and other areas in Africa within the Miombo ecoregion.
Tree species preferred for wood fuel in brick making in Morogoro municipality, Tanzania
(i-Proclaim, 2014) Magembe, Kija Steven; Makonda, Fortunatus B. S.
This study aimed at identifying the tree species commonly used in brick making in Morogoro Municipality, Tanzania and proposing means for generation of modified energy sources that would cover the full value of forest resource production and consumption. The research approach was two- folds using; Participatory Rural Appraisal (PRA) and quantitative measurements. Results revealed that almost all brick makers in the area used fuelwood as the major energy sources. Nine (9) tree species were used in brick making, namely; Mkarati (Burkea africana), Mlama (Combretum molle), Mbiriti (Senna siamea), Muarobaini (Azadirachta indica) and Mwembe (Mangifera indica). Others were Mkaratusi (Eucalyptus spp), Mchongoma (Pithecellobium dulce) Mjohoro (Senna spectabilis) and Mkrisimasi (Delonix regia). Of these, Mkarati, Mwembe, Mlama and Mbiriti were mostly preferred, though other species were also used insignificantly. Increasing scarcity of some of other tree species meant that deforestation from the nearby forests was a common problem. To reduce deforestation in the area, use of alternative energy sources in brick making such as rice husks and bagasse are recommended. Other recommendations are the establishment of woodlots, practicing agro-forestry systems and intensive afforestation and reforestation programmes for more sustainable fuelwood use.
Medicinal plant parts and practices used by communities around the Miombo woodlands of Urumwa, Tanzania
(2014-04-17) Hall, J. B.; Makonda, F. B. S.; Ishengoma, R. C.
A study to document medicinal plants parts and practices in relation to sustainable use was performed in communities around the Miombo woodland of Urumwa in Tanzania. Data collection was based on semi-structured interviews and discussion with key stakeholders. G-tests were used to ascertain differences in medicinal plants practices between women and men. Roots were the commonly used parts for medicine followed by barks. In practice, boiling and grinding were the preferred methods for preparing remedies. Remedies are admistered orally in decoctions form with lack of standardized dosages. Medicinal plants are collected from the reserve using both root digging and bark stripping methods. Local communities need sensitization through trainings on various aspects of medicinal plants practices especially issues of sustainable harvesting methods, simple processing, domestication and the importance of standardized dosages so as to improve work performance, ensure resource sustainability and contribute to development of the primary health care system in Tanzania.
Potentials of lesser known and lesser utilized indigenous agroforestry Timbers in Kilosa district, Morogoro Tanzania
(2015) Makonda, F.B.S.; Augustino, S; Gillah, P.R; Ishengoma, R.C; Kitojo, D.H; Ruffo, C; Eriksen, S; Msanga, H.P
The paper presents baseline results of gathered important information for inference in establishing optimal production and utilization of Lesser-known (LK) and Lesser-utilized (LU) indigenous agro- forestry timber species (IAGTS) in improving incomes of rural communities in Kilosa District. The main key questions were: what are the characteristics of the sites for establishing LK and LU IAGTS; who are the main actors in establishing LK and LU IAGTS; what are LK and LU IAGTS and other species for establishment in the study area and what are the strengths, weaknesses, opportunities and threats for establishing LK and LU IAGTS in the study area. Data collection was participatory, involving key stakeholders, participants’ observations and literature surveys. A total of eight villages were identified as potential sites for nursery establishment with seven main actors’ mostly local communities engaged in tree planting activities under associations. Five priority LK and LU IAGTS were identified and selected for nursery establishment. These were: Lonchocarpus capassa (Mfumbili), Sclerocarya birrea (Mng’ongo), Vitex doniana (Mfudu), Pseudolachnostylis maprouneifolia (Msolo) and Combretum zeyheri (Mlama mweupe). The strengths and opportunities favouring the establishment of LK and LU IAGTS nurseries were identified, with a few weaknesses and threats which needed to be worked upon.
Fuelwood consumption in brick making: A case of Morogoro Municipality, Tanzania
(2015-11) Magembe, K. S.; Makonda, F. B. S.; Masanja, M. M
The study aimed at determination of the annual fuel wood consumption caused by brick making activities in Morogoro municipality, Tanzania. The collected and analyzed data were based on field survey and quantitative measurements. Field survey based on interviews with group leaders dealing with brick making activities as the main focus was conducted. Data were collected from brick maker’s survey as well as from some relevant secondary sources. The study revealed that almost all brick makers in the municipal used fuelwood as the major energy sources. The average annual fuelwood consumption for brick making was 8,610 m3. In order to reduce heavy dependency of fuelwood in the area, use of alternative energy sources in brick making such as rice husks, maize cobs and baggasse are recommended. The study also recommends the establishment of woodlots in all wards, establishment of agro-forestry systems and intensive afforestation and reforestation programmes to be undertaken by the municipality for more sustainable fuelwood use. Keywords: Fuelwood, consumption, brick making, Tanzania
Potentials of lesser known and lesser utilized indigenous agroforestry timbers in Kilosa District, Morogoro Tanzania
(International Journal of Education and Research, 2015-11-12) Makonda, F. B. S.; Augustino, S.; Gillah, P. R.; Ishengoma, R. C.; Kitojo, D. H.; Ruffo, C.; Eriksen, S.; Msanga, H. P.
The paper presents baseline results of gathered important information for inference in establishing optimal production and utilization of Lesser-known (LK) and Lesser-utilized (LU) indigenous agroforestry timber species (IAGTS) in improving incomes of rural communities in Kilosa District. The main key questions were: what are the characteristics of the sites for establishing LK and LU IAGTS; who are the main actors in establishing LK and LU IAGTS; what are LK and LU IAGTS and other species for establishment in the study area and what are the strengths, weaknesses, opportunities and threats for establishing LK and LU IAGTS in the study area. Data collection was participatory, involving key stakeholders, participants’ observations and literature surveys. A total of eight villages were identified as potential sites for nursery establishment with seven main actors’ mostly local communities engaged in tree planting activities under associations. Five priority LK and LU IAGTS were identified and selected for nursery establishment. These were: Lonchocarpus capassa (Mfumbili), Sclerocarya birrea (Mng’ongo), Vitex doniana (Mfudu), Pseudolachnostylis maprouneifolia (Msolo) and Combretum zeyheri (Mlama mweupe). The strengths and opportunities favouring the establishment of LK and LU IAGTS nurseries were identified, with a few weaknesses and threats which needed to be worked upon.

Browse

Browsing Articles, Conference and Workshop Papers Collection by Issue Date