Evaluation of a variable rate controller for aldicarb application around buffer zones in citrus groves
Loading...
Date
2007-01-25
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Advances in precision farming technologies have facilitated controlled application of agrochemicals and documentation procedures
to follow environmental regulations. This paper details evaluation of a commercial variable rate (VR) controller for preventing
aldicarb applications in the buffer zones around potablewater wells of citrus groves. The controllerwas coupled to two common drive
mechanisms, a ground-driven electric clutch-engaged (GDEC) and pulse-width-modulation motor-driven (PWMM). The evaluation
involved determination of dynamic performance of the VR application system through quantification of reaction times and rate
transition distances and determination of appropriate “look-ahead” times for each of the drive mechanisms. Without a look-ahead
(zero) setting, the mean midpoint reaction distances were about 1.8 and 3.6m for the GDEC and PWMM mechanisms, respectively,
at 7.0-km/h ground speed. For the GDEC, a look-ahead time of 1 s gave the mean midpoint reaction distances of −0.06 and 0.04m
during step-up and step-down of the rate, respectively. For PWMM, the best look-ahead times were 1 and 2 s during step-up and
step-down of the rate, respectively.However, since the prototype unit could not accommodate two look-ahead times, the compromise
look-ahead time for both step-up and -down was 2 s. Validation in the actual buffer zone showed that, at 95% confidence level, the
buffer zone should be increased by 2.5 or 3.3m in commercial applications using GDEC or PWMM systems, respectively.
Description
Computers and Electronics in Agriculture, 2007; 56:147–160
Keywords
Granular applicator, Variable rate application, Controller, Prescription map